17
2022-01
How to wire the smart panel
How to wire the smart panel? The wiring of the smart panel is relatively simple. You only need to pry off the front cover of the smart switch with a flat screwdriver, and the smart switch cover will be taken off; the specific operation steps are as follows.
How to wire the smart panel
1. Use an inner flat screwdriver to pry open the front cover of the smart switch, and then take off the smart switch cover.
2. Prepare wiring, connect the blue neutral wire to the smart switch LA.
3. Connect the red live wire to the smart switch L, and the red ground wire to the smart switch L1.
4. After the wiring is completed, the smart switch is ready to be installed, and the fixing screws are tightened.
5. Cover the smart switch cover and the operation is complete.
The intelligent control panel is relatively well-developed in product technology, so the transmission speed, stability and anti-interference ability are very good. The product has a rationalized circuit safety design in the design concept to avoid losses such as short circuit and burnout of the switch. Compared with ordinary panels, smart control panels have more advantages.
Haosheng Lighting
Previous
Next
Previous
Next
Get A Free Consultation
with Our Expert
CopyRight © 2022 Zhongshan Haosheng Lighting Co., Ltd. Rights Reserved